Captain Typho discount S-5 heavy blaster pistol Star Wars

Item Features:

!!!NOT A REAL GUN, THIS IS A PROP REPLICA!!!

This is a 3D printed Kit.
Colors may vary from picture.
Printed on original Prusa printers to ensure quality.
Will require minimal amount of post processing work.
This is not a finished gun and requires some assembly, sanding, and painting.

The S-5 heavy blaster pistol was a versatile weapon with a heavy wooden gripstock and twin scopes for sighting and rangefinding. Unlike most handheld blaster weapons, the discount S-5 fired green blaster bolts, similar to the Model Q2 hold-out blaster pistol. The S-5 also featured a dart launcher underneath the main barrel, able to fire either an anesthetic microdart, a sting charge, or a grappling hook tip. The latter was used in conjunction with a liquid-cable shooter attachment; a quick customization that turned the S-5 pistol into a durable ascension gun (as an ascension gun, the S-5's liquid-cable could hold up to 500 kilograms). The cable reservoir held enough liquid to form twenty meters of cable, and the spike launcher itself cost around 50 Republic Credits around the time of the Invasion of Naboo.



Includes:

All parts printed necessary to assemble one blaster
Orange barrel or tip as required by law

Not Included:
hardware and glue

--Legal Notice--
This is not an officially licensed product and is only considered FAN ART, the item is 3D printed by me. Fan Art is protected under Fair Use.

§ 272.3 Approved markings.

The following markings are approved by the Secretary of Commerce:

(a) A blaze orange (Fed-Std-595B 12199) or orange color brighter than that specified by the federal standard color number, solid plug permanently affixed to the muzzle end of the barrel as an integral part of the entire device and recessed no more than 6 millimeters from the muzzle end of the barrel.

(b) A blaze orange (Fed-Std-595B 12199) or orange color brighter than that specified by the Federal Standard color number, marking permanently affixed to the exterior surface of the barrel, covering the circumference of the barrel from the muzzle end for a depth of at least 6 millimeters.