ScottoFly - Ergonomic Handwired discount Keyboard Kit

This is a kit for my ScottoFly handwired keyboard. It includes all the parts you need and is perfect as a gift for that keeb lover in your life.

The ScottoFly runs QMK firmware and has what I believe to be the best keymap flashed by default (depending on your selection) but if that map isn't working for you, the firmware files are available at: scottofly.scottokeebs.com.

You can find the hex firmware files as well as build directions at: files.scottokeebs.com

Unlike my individually sold cases, these kits are printed at 25% infill to keep production costs down in order to keep the kit cost down. The plate however is completely solid. If you want a solid case, please message me and I can create a customized order for an extra discount charge.

Please do keep in mind this is a kit of parts for a handwired keyboard. Handwired boards are fairly technical and although I did my best to make it as simple as possible, you will most likely need to troubleshoot stuff that isn't easily solved by anyone but you.

I recommend watching this video before deciding if you want this kit or not: https://youtu.be/hjml-K-pV4E

~ Includes ~
- 38 IN4148 Diodes
- 30 M2x6mm Screws
- 16 M2x8mm Standoffs
- 38 Gateron Milky Yellow Switches
- 10 Heat Shrink Tubings
- 4 Rubber Feet
- 12 Feet of Wire
- Pre-Flashed Arduino Pro Micro (Micro-USB)
- Keyboard Case (25% Infill Print)
- Keyboard Plate (Solid Print)
- Keycaps (If added)

~ Tools ~
- Soldering Iron (Chisel Tip Recommended)
- Solder (63/37 Recommended)
- Flux (Optional)
- Wire Strippers
- Phillips Screwdriver
- Hot Glue
- Lighter
- Marker

~ Disclaimer ~
-------------------
- These cases are 3D printed meaning there will be visible layer lines.
- The bottom of the case will sometimes have blemishes between the screw holes.
- There may be small gaps or blobs.
- The screw holes may be tight.

~ Warranty ~
-------------------
- All parts come with no warranty, if you break anything or fry the Arduino, that's on you.
- Everything is ensured to be within quality standards before it ships out.
- Firmware is confirmed to be flashed before being shipped out.
- If you hurt yourself while assembling the board, that's on you.